Metal Roof Coating in North Shields

Using BBA Approved Metalseal 20

This is a Metalseal installation North Shields completed by a Liquasil Approved Installer during 2019.

This is a Metalseal installation North Shields completed by a Liquasil Approved Installer during 2019.

The original factory finish was delaminating across the entire roof and the cut edges were corroded and in need of treatment.

To prepare the roof for coating, it was first jet washed using 4000 psi jet wash with turbo lance. This removed all loose and flaking finishes and left only sound substrate behind.

The remaining factory finish was adhesion tested to ensure that it would not delaminate from the metal roof.

The cut edge corrosion was treated with Liquasil’s SWT Corrosion Primer, to prevent further rusting. SWT is a proven marine grade treatment that can be applied directly to red rust, even if the surface is soaking wet.

All spot rust patches were also treated with SWT Corrosion Primer before being coated with a single coat of Metalseal 20.

Once all preparation was completed, the entire roof was sprayed with Metalseal 20, using airless spray equipment. Previously treated cut edges and spot corrosion received 2 coats.

The colour in this case was Goosewing Grey.