Roof Coatings Manufacturer

Welcome to Liquasil Ltd, a British manufacturer of advanced polymer roof coatings, designed by Chartered Building Surveyors to solve the problems associated with industrial and commercial property roofs.

The expertise of building surveyors and polymer chemists in a single company.

Explore Our Roof Coating Systems

BBA Approved asbestos roof coating from Liquasil Ltd

Asbestos Roof Coating

Asbestoseal is a purpose-made, BBA Approved asbestos roof coating and refurbishment system with a 25+ year service life and product warranty.

Flexlap cut edge corrosion treatment by Liquasil Ltd

Cut Edge Corrosion Treatment

The first stand-alone BBA Approved cut edge corrosion on the UK market. Flexlap treats corrosion cost effectively and is guaranteed for 15 years.

BBA Approved metal roof coating, Metalseal from Liquasil Ltd

Metal Roof Coating

Metalseal is a purpose-made, BBA Approved metal roof coating and refurbishment system with a 25+ year service life and product warranty.

GlazeProtect by Liquasil adds new life to old GRP rooflights

Rooflight Coating

In most cases, we recommend that degraded GRP roof lights are replaced, but for those occasions where coating is preferred, we offer GlazeProtect.

Liquid gutter liner, Gutterseal from Liquasil Ltd

Liquid Gutter Lining

Gutterseal is a fully bonded, seamless gutter lining system for industrial gutters, suitable for application to metal, asbestos and concrete gutters.

Cladding coating by Liquasil Ltd

Cladding Coating

Cladcoat is a budget-friendly acrylic coating for use on vertical cladding. Any RAL colour andlow minimum order quantities make Cladcoat the specifier’s choice.

Liquasil Silicone Systems Advantages

Designed By Building Surveyors

Formulated to solve the problems experienced with industrial roofs.

Low Solvent or Solvent-Free

Can be applied where other coatings can’t go!

Single Pack Silicones

No mixing or messing. Just open, stir and apply.

UV Stable

Unaffected by direct sunlight, so does not fade in sunlight.

Up to 1400% Elasticity

Remains highly flexible from -60ºc to +200ºc.

Single Coat Application

Single coat application in most cases, means material & labour savings.

Product Guarantee

15 & 20 year product warranties as standard depending on system.

Resists Fungal Growth

Unsightly moss and lichen growth eliminated.

Any RAL Colour

Say goodbye to grey – we can make ANY colour.

Apply all year round

Silicone systems cure at lower temperatures

No Fleece Required

Apply straight from the can by brush, roller or airless spray.

Made In the UK

Ensures continuity of supply & technical support.

Liquasil Cladcoat™ Advantages

Cladcoat™ is Liquasil’s dedicated, multi-surface cladding coating. It differs from our silicone products because it uses water-based alkyd technology. This provides an easy to use and quick to dry product that’s suitable for use in temperatures above 5°c.

Fast Application

Single pack cladding paint – use straight out of the tin. Dries in around 20 minutes depending on temperature and wind conditions.

Easy Application

Cladcoat™ has super opacity and can cover existing coatings of the same colour in one coat. For complete coverage, we recommend two or more coats.

Solvent Free

Cladcoat™ is a solvent-free, water based alkyd, so there are no nasty odours during or after installation. Suitable for use on metal, asbestos cement and compsites.

Primers Available

Primers are not always required, but bare galvanised surfaces will require the use of our single-pack galvanised surfaces primer for complete peace of mind.

The Liquasil Guarantee

We want to make your roof coating decision as easy as possible, so Liquasil Ltd has a number of guarantee options to support its product warranty. On all qualifying full roof coating installations, gutter liner projects and cut edge corrosion works. Insurance backed insurance policies may be provided via your approved installer at additional cost.

Note: Cladcoat™ is excluded from warranty due to the wear and tear often experienced with industrial premises. It is a 10 year system and can be installed by any competent tradesperson. We do not inspect Cladcoat™ projects as standard.

Call us today on 0121 709 5352 and we’ll help you find the right solution and provide you an approved installer in your area.